Elite Cement - Product Data

PRODUCT DATA SHEET

ACRYL M

Acrylic Coating for Autoclaved Aerated Concrete

ACRYL M is a premixed, acrylic coating especially formulated to protect autoclaved aerated concrete panels with a colorful decorative appearance. Unlike ordinary paint coatings, ACRYL M exhibits high coating thickness and elasticity, while maintaining high vapor permeability to provide a long lasting finish.

Advantages High build coating thickness of 1mm
High water resistance
Vapor permeable
High UV resistance
Long term durability
High elasticity
Capable of machine application
Unlimited color possibilities
Fast drying

Surface
Preparation All bases to receive ACRYL M must be clean, and free of grease, oil, dirt, paint, and other foreign residues. Old autoclaved aerated concrete areas must be pre-coated with ACRYL PRIME to ensure adhesion.

Mixing Mixing: ACRYL M is to be applied in two layers. The first coat is diluted with 20% water (approximately 3 quarts). The second coat is diluted with 5% water (approximately 1 1/2 pints). Mix with low speed drill.

Application Apply ACRYL M in two coats. The first coat is rolled on in two different directions to insure proper coverage. Once dry the second coat is rolled on with a neoprene foam roller to achieve the finished texture. Care should be taken to roll in the same direction to achieve a uniform appearance.

Precautions To prevent cold joints, apply coating finish in complete areas and schedule stops at naturally occurring breaks and joints. Do not apply if temperature is expected to drop below 40° F within 12 hours of application.

Drying Time Depending on the temperature and humidity, coating film dries in 4 to 12 hours.

Cleaning Immediately after use, rinse with water. Protect other surfaces from contact with coating.

Coloring ACRYL M is available in a wide variety of standard colors. Custom color matching is available upon request.

Package Size 5 gallon pail

Coverage One 5 gallon pail covers 180 sq.ft.

Storage Under cool, shaded conditions, product storage life is one year from manufacture.
Technical Data

Wet Density
Water Vapor Permeance
Capillary Water Absorption
13.4 lbs./gal.
5 perms
0.008 lbs./ft.²h.^0.5

Short Form Specifications for ACRYL M

Advantages	High build coating thickness of 1mm High water resistance Vapor permeable High UV resistance Long term durability High elasticity Capable of machine application Unlimited color possibilities Fast drying
Surface Preparation	All bases to receive ACRYL M must be clean, and free of grease, oil, dirt, paint, and other foreign residues. Old autoclaved aerated concrete areas must be pre-coated with ACRYL PRIME to ensure adhesion.
Mixing	Mixing: ACRYL M is to be applied in two layers. The first coat is diluted with 20% water (approximately 3 quarts). The second coat is diluted with 5% water (approximately 1 1/2 pints). Mix with low speed drill.
Application	Apply ACRYL M in two coats. The first coat is rolled on in two different directions to insure proper coverage. Once dry the second coat is rolled on with a neoprene foam roller to achieve the finished texture. Care should be taken to roll in the same direction to achieve a uniform appearance.
Precautions	To prevent cold joints, apply coating finish in complete areas and schedule stops at naturally occurring breaks and joints. Do not apply if temperature is expected to drop below 40° F within 12 hours of application.
Drying Time	Depending on the temperature and humidity, coating film dries in 4 to 12 hours.
Cleaning	Immediately after use, rinse with water. Protect other surfaces from contact with coating.
Coloring	ACRYL M is available in a wide variety of standard colors. Custom color matching is available upon request.
Package Size	5 gallon pail
Coverage	One 5 gallon pail covers 180 sq.ft.
Storage	Under cool, shaded conditions, product storage life is one year from manufacture.