ACRYL PRIME is a solvent based acrylic primer specifically designed to coat autoclaved aerated concrete panels prior to finish coating application. ACRYL PRIME stabilizes the panel surface by deep penetration into the pores. ACRYL PRIME application over the entire panel is necessary for old autoclaved aerated concrete panels which may have been stored for prolonged periods.

Over newly routed bevels formed during construction, or bevels laden with dust, application of ACRYL PRIME is necessary before the sealant is applied. Typically, factory formed bevels do not need to be primed prior to sealant application.

Surface Preparation	All bases to receive ACRYL PRIME must be clean, and free of grease, oil, dirt, paint, and other foreign residues.
Mixing	Mix with a stick prior to using.
Application	Apply ACRYL PRIME with a roller or brush to achieve an even coat.
Precautions	Do not apply if temperature is expected to fall below 25º F within 24 hours of application. This product contains solvents and must not be used on areas that are adversely affected by solvents. Use only in areas of good ventilation. Coating is flammable, therefore keep away from flames or ignition sources.
Drying Time	Dries in 12 to 48 hours depending upon temperature and humidity.
Cleaning	Clean with mineral spirits. Protect other surfaces from contact with coating.
Color	Clear
Package Size	5 gallon pail.
Coverage	One 5 gallon pail covers 260 sq.ft.
Storage	Under cool, shaded conditions, product storage is one year from manufacture. Store away from flames.