Elite Cement - Product Data

PRODUCT DATA SHEET

ACRYL SP

Highly Impermeable Interior Coating for Autoclaved Aerated Concrete

ACRYL SP is a solvent based acrylic coating designed to provide an impermeable interior surface over AAC panels. As a result, application of ACRYL SP protects the AAC panels from high levels of water and chemical vapors inherent in industrial operations.

Surface
Preparation All bases to receive ACRYL SP must be clean and free of grease, oil, dirt, paint, and other foreign residues. Block walls should have plaster or cementitious coating prior to application. Over panels, the joints must be filled with PANELBOND or FLEX W depending on their location.

Mixing The first coat shall be diluted with 30% mineral spirits (approximately 5 quarts). The second and third coats shall be diluted with up to 5% mineral spirits (approximately 1 1/2 pints).

Application Apply ACRYL SP in three coats. The first two coats may be applied with a brush or roller. The third coat is applied and textured by rolling with a neoprene foam roller.

Precautions This product contains solvents and must not be used on areas that are adversely affected by solvents. Use only in areas of good ventilation. Coating is flammable, therefore keep away from flames or ignition sources. Do not apply if temperature is expected to drop below 20⁰F within 24 hours.

Drying Time Immediately after use, rinse tools with mineral spirits. Protect other surfaces from contact with coating.

Cleaning Immediately after use, rinse tools with mineral spirits. Protect other surfaces from contact with coating.

Coloring ACRYL SP is available in a wide variety of standard colors. Custom color matching is available upon request.

Package Size 55 pound pail

Coverage 55 pounds covers 150 sq.ft. in 3 coats.

Storage Under cool, shaded conditions, product storage is one year from manufacture. Store away from flames.
Technical Data

Wet Density
Water Vapor Permeance
Capillary Water Absorption
13.5 lbs./gal.
.5 perms
0.002 lbs./ft.²h.^0.5

Short Form Specifications for ACRYL SP

Surface Preparation	All bases to receive ACRYL SP must be clean and free of grease, oil, dirt, paint, and other foreign residues. Block walls should have plaster or cementitious coating prior to application. Over panels, the joints must be filled with PANELBOND or FLEX W depending on their location.
Mixing	The first coat shall be diluted with 30% mineral spirits (approximately 5 quarts). The second and third coats shall be diluted with up to 5% mineral spirits (approximately 1 1/2 pints).
Application	Apply ACRYL SP in three coats. The first two coats may be applied with a brush or roller. The third coat is applied and textured by rolling with a neoprene foam roller.
Precautions	This product contains solvents and must not be used on areas that are adversely affected by solvents. Use only in areas of good ventilation. Coating is flammable, therefore keep away from flames or ignition sources. Do not apply if temperature is expected to drop below 20⁰F within 24 hours.
Drying Time	Immediately after use, rinse tools with mineral spirits. Protect other surfaces from contact with coating.
Cleaning	Immediately after use, rinse tools with mineral spirits. Protect other surfaces from contact with coating.
Coloring	ACRYL SP is available in a wide variety of standard colors. Custom color matching is available upon request.
Package Size	55 pound pail
Coverage	55 pounds covers 150 sq.ft. in 3 coats.
Storage	Under cool, shaded conditions, product storage is one year from manufacture. Store away from flames.